Installation of new disposer (continued):
16 !*
17
18
*CAUTION: DISHWASHER CONNECTION ONLY Knock out drain plug and remove plug from inside of disposer.
*WARNING: SHOCK HAZARD. Turn disposer over and remove electrical cover plate. Pull
out wires. DO NOT REMOVE CARDBOARD SHIELD.
*WARNING: SHOCK HAZARD. With electrical supply turned off, insert cable connector (not included) and run electrical cable through access hole on bottom of disposer. Tighten cable connector.
19 | 1 |
| 20 |
21 | L |
|
M
2
*WARNING:
SHOCK HAZARD Connect white to white and black to black or red with wire nuts (not includ- ed); ground wire to green grounding screw. Unit must be grounded for safe and proper installation.
Push wires into disposer (do not displace cardboard shield) and replace electri- cal cover plate.
N
Place tube (M or N) into Anti- Vibration Tailpipe Mount. Use provided tubes for best results. Secure with hose clamp (L).
*CAUTION:
USE ONLY INSINKERATOR SUPPLIED HOSE CLAMP.
6