Step 2. RearWheel Assembly
Turn stroller onto its side. Grasp rear wheel in one hand, slide wheel’s axle into hole in rear of frame (Figure B1). Check to see that the wheel is properly inserted by pulling on the wheel firmly, the wheel should not come off if fully inserted/locked. Repeat for other side. To release wheel push up on axle release lever while pulling off wheel (Figure B2).
To engage rear brakes:
Step lightly on the side brake levers or rear brake bar to engage brakes. To disengage, lift up on brake levers or bar (Figure B3).
A4
Storage Latch
A3
Side Latches
B1
Rear
Axle
Rear
Frame
Axle Release Lever
Axle Release Lever
B2
B3
Rear Brake Bar
Brake Levers
3
