![](/images/new-backgrounds/1217152/2171529x1.webp)
Step 5. Installing ChildTray
Position tray as shown with the levers open, when aligned close both levers to lock in place (Figure E). To remove open both levers and pull off. Note the child tray can not be used when using the car seat adapter bar.
Step 6. Installing Parent’s Convenience Tray
Snap parent tray onto the handlebar aligning the tray’s holes with the handlebar’s knobs (Figure F).
Step 7. Adjusting Handle Height
While pushing both handle buttons in, rotate handle to the desired height (Figure G).
Step 8. Proper use of Seat Belt,
Shoulder Straps, and Recline
WARNING: Avoid serious injury from falling or sliding out. Always use seat belt.
1.Place child in stroller seat. Make sure
2.When child is seated, place shoulder straps over the child’s shoulders and clip onto the waist ring.
3.Buckle the
G
Handle Adjust
Button
Handle Adjust
Button
E
Child Tray
Levers
F
Parent Tray Hole
Handlebar Knob
H
Shoulder
Straps
Waist
Strap
5