NEXT
Duplex Unit
■Checking and Adjusting the Paper Reference Position
NOTE
Perform the procedure below after adjusting the paper reference positions for the paper feed unit and the
1.Display the Tech. Rep. Mode screen.
(For details about displaying the Tech. Rep. Mode screen, refer to the Service Manual.)
C4658P001CA
2. Touch “Machine Adjust”.
5. Touch “1st.”.
C4657P002CA
6. Press the Start key. A test page is printed.
C4004O068CA
3. Touch “PRT Area”.
C4659P004CA
4. Touch “Dup. Left Margin”.
a
7.Measure the width of loss for the test pattern printed on the back of the test page.
NOTE
Do not measure from the back of the test pattern.
Standard width (a): 3.0 mm ± 1.0 mm
If the measured width of loss does not meet
its standard width, touch 
and 
in the
Print another test page and check the printed
C4657U014AA image.
C4657P001CA
– 4 – | |
|
