Duplex Unit
NEXT
■Installing the Duplex Unit
1.Align the two tabs on the duplex unit with the two holes in the copier, and then install the duplex unit.
C4657U013AA | C4657U005AA |
NOTE
While supporting the duplex unit, open the door on the right side of the copier, and make sure that the tabs are secured within the holes in the copier door.
C4657U006AA
2.Open the duplex unit, and then secure the duplex unit to the copier with the enclosed
Firmly tighten the screws with a coin or screwdriver.
NOTE
Keep the duplex unit supported until it is secured with the screws.
C4657U007AA | C4657U008AA |
3. Plug the two connectors from the duplex unit into the connectors on the copier.
C4657U009AA
C4657U010AA
4. Secure the cable of the duplex unit with the cable holder as shown.
C4657U017AA
5. Install the enclosed wiring cover.
C4657U011AA
– 3 – | |
|
