Integra DTA-70.1 Features, Watts per channel, minimum RMS into, THX Ultra2 certified*1

DTA-70.1_En_100108.book Page 4 Friday, January 8, 2010 2:04 PM

Thank you for purchasing an Integra 9-Channel Ampli- fier. Please read this manual thoroughly before making connections and plugging in the unit.

Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new 9-Channel Amplifier.

Please retain this manual for future reference.

Features

■150 Watts per channel, minimum RMS into

8 ohms, 2 channels driven, from 20 to

20,000 Hz with no more than 0.05 % total harmonic distortion

■THX™ Ultra2™ certified*1

■WRAT–Wide Range Amplifier Technology (5 Hz-100 kHz bandwidth)

■Push-Pull amplification design with three- stage inverted Darlington circuitry

■Massive toroidal transformer

■Customized 22,000 µF large capacitors for effective power supply

■Audio-tuned reference capacitors for each channel

■Low-impedance, copper bus plates for perfect ground potential

■Gold-plated, XLR and machined, solid brass RCA input terminals

■Custom-designed large power transistors to drive high currents

■High-current, low-impedance circuit board by using thick copper foil (70 µ)

■Gold-plated, color-coded, transparent speaker posts

■Auto power-down function

■Multi-zone capability (up to Zone 3)*2

■Bi-amping capability*2

■12V trigger in

■Aluminum front panel

■Detachable power cord

*1

THX and Ultra2 are trademarks of THX Ltd. THX may be registered in some jurisdictions. All rights reserved.

*2 Depends on AV controller

4