System Release 6.0 cPCI Feature Pack 1 for Windows — September 2004 9
2
2.System Requirements
This chapter describes the system requirements for Intel® Dialogic® System Release 6.0
cPCI Feature Pack 1 for Windows:
•Basic Hardware Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
•Basic Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1 Basic Hardware RequirementsMinimum Hardware Requirements
The minimum hardware requirements are listed below for this release. Customers tha t use
high-densities systems may require more robust systems.
•CompactPCI* chassis
•700 MHz Intel® Pentium® 3 processor
•512 MB RAM
•500 MB free space on hard disk
•CD-ROM drive
•VGA disp lay
•Pointing device
Note: Drivers for Windows do not support more then 4 GB of RAM.
Recommended Hardware Requirements
The recommended hardware requirements are listed below for this release:
•CompactPCI* chassis
•850 MHz or faster Intel® Pentium® processor
•512 MB RAM
•600 MB free space on hard disk
•CD-ROM drive
•VGA disp lay
•Pointing device