34 HMP Release 2.0 for Windows Software Installation Guide — December 2005
Installing the Software
Figure 5. Modify Option on InstallShield Wizard Screen
Select Modify and click Next.
Note: A procedure for using the Repair option is given in Section4.7, “Repairing an
Installation”, on page 43. A procedure for removing the software is given in
Chapter 3, “Uninstalling the Software”.
4. The Select Features screen will appear. The items that are already installed will be checked.
Select additional items or de-select (un-check) items. Note that if you select new items, the
original distribution medium used to install the HMP Release 2.0 software must be available
(CD or network share). If you de-select an item, it will be uninstalled.
5. When you are finished making your selections on the Select Features screen, click Next. You
will see a progress bar which shows that the change(s) you requested are being made.
6. After the software has been modified, you will see a Maintenance Complete screen. This
screen will indicate whether a reboot is required. If a reboot is required, choose to reboot now.
(If you choose to reboot later you must manually reboot the system before the install will be
complete.) If you inserted a CD to add features, remove it from the drive. Click Finish to
proceed.
7. Start the system. The HMP system is started using the configuration manager (DCM). From
the DCM main window, click the Start System option from the System pull-down menu or
click the Start All Enabled Devices icon.