Testing a cable
Here’s an easy way to test the link integrity of a cable:
1Plug one end of the cable into the
2Plug the other end of the cable into port 2X.
3Check port 1 and port 2 Speed LEDs on the front of the unit.
If these ports are lit, you have a functioning
If the ports are unlit, remove the cable from the
If the LEDs are unlit, you have a bad cable.
If a cable passes either of these tests, but the network connection is slow, verify that wires 1 & 2 and 3 & 6 on the cable are twisted pairs.
11