Intel 130T manual Frequently asked questions

Frequently asked questions

Does each port operate at 10Mbps or 100Mbps?

Yes. Each port on the Express 130T Standalone Hub is capable of 10Mbps or 100Mbps half-duplex operation.

Do I have to set a port’s speed?

No. Ports on the Express 130T Standalone Hub automatically detect and match the speed of an attached device.

Do ports operating at different speeds communicate with each other?

Yes. The Express 130T Standalone Hub’s internal bridge allows all ports to communicate with each other, regardless of operating speed.

Can I connect the Express 130T Standalone hub to another hub?

Yes. For connection guidelines, see “Connecting to Hubs and Switches” on page 6.

Can I configure the Express 130T Standalone Hub for full-duplex operation?

No. Hubs do not support full-duplex operation.

Can I wall mount the Express 130T Standalone Hub?

Yes. Using the two wall mount hole guides on this page, mark and drill into the wall where you want to mount the hub. Then insert the provided screws into the wall and hang the hub.

6.00" (15.24 cm.)

Wall mount hole guides

2