18
(2) ATX 12V Power Connector (8-pin block) : ATX12V
This is a new defined 8-pin connector that usually comes with ATX Power
Supply. The ATX Power Supply which fully supports LGA 1156 processor must
including this connector for support extra 12V voltage to maintain system power
consumption. Without this connector might cau se system unstable because the
power supply can not provide sufficient current for system.
Pin 1
(3) Large 4-Pin Power Connector：
：：
：J1
The connectors are 4 -pin connector that supports extra 12V / 5V power to your
system
(4) PS/2 Keyboard /Mouse Connectors: KB1
The connectors are for PS/2 keyboard input devices.
(5) USB Port connector: USB post fromCN1 and UL1
The connectors are 4-pin connectors that connect USB devices with the 480
Mbit / sec data transfer rate to the system board.
(6) LAN Port connector: RJ-45 LAN ports from UL1
This connector is standard RJ45 over USB connectors for Network connection.
The connector supports 10MB/100MB/1G B/s data transfer rate
(7) Audio Line-In, Lin-Out, MIC, RS-Out, CS-Out，
，，
，SS-Out connector: AUDIO
These Connectors are 6 Phone-Jack for LINE-OUT, LINE-IN, MIC, RS-Out,
CS-Out，SS-Out audio connections.
Line-in: (BLUE)
Audio input to sound chip
Line-out: (GREEN)
Audio output to speaker
MIC: (PINK)
Microphone Connector
RS-OUT: (BLACK)
Rear-Surround audio output
CS-OUT: (ORANGE)
Center/ Subwoofer audio output