30
3-7 Integrated Peripherals
Configure SATA as
Press Enter to select the SATA type. The optional settings are: IDE; AHCI and
Disabled.
SATA#1 IDE Configuration
The optional settings are: Compatible and Enhanced.
SATA#2 IDE Configuration
The optional settings are: Disabled and Enhanced.
Onboard PCIE Lan Controller
Use this item to enable or disable onboard PCIE Lan controller.
Onboard PCIE Lan BootROM
The optional settings are: Disabled; Enabled.
USB Functions
The optional settings are: Disabled; Enabled.
Emulation Type
If Auto, USB devices less than 530MB will be emulated as Floppy and remaining as
hard drive. Force FDD o ption ca be used to force a HDD formatted driver to boot as
FDD (Ex. ZIP drive).
Serial Port1 Address
Allow BIOS to Select Serial Port1 Base Addresses.
IR Address
Allow BIOS to Select Serial Port2 Base Addresses.
IR Mode
Allow BIOS to select mode for Serial Port2.
IR Duplex Mode
Allow BIOS to select Full or Half Duplex for Serial Port2. (IR Mode)
IRTX Pin Select
Allow BIOS to select transmit pin is normal condition or inverse the IRTX (IR Mode).