Intel 330T Quick Start, Install the Hub, Connect 2 the Devices, Check the 3 Connections, From

English

Quick Start

1 Install the Hub

•Remove the hub and parts from the box.

•Attach the enclosed brackets if you plan to mount the hub in a rack.

•Install the Intel ® Express 330T Stackable Hub in a rack or on a shelf.

•Plug in the power cord.

Connect

2 the Devices

•All ports automatically detect the speed of the device connected to them.

•Connect PCs and print servers to the hub with straight-through cables.

•Use a crossover cable to connect a hub to another hub or switch.

•Use a straight-through cable to connect to another hub or switch when port 1 is set to MDI.

•Use only CAT 5 UTP to connect 100Mbps devices. To connect 10Mbps devices, use CAT 3, 4, or 5 UTP.

Check the

3 Connections

•Check the port LEDs to confirm the link status.

•A solid green LED (on the left) indicates a valid link.

Rack: Use the three small screws to attach the brackets to the hub.

Intel®	Express 330T	Stackable Hub
					Module A
1	2							Link\Activity
	3	4								Speed
		5	6	7								Duplex	Module B
					8
					9	10								Module Present
							11	12	13
										14	15		Left	Managed
												16
														Collisions
														10Mbps
													Right	100Mbps Status

Shelf: Peel off the protective backing and attach the rubber feet to the hub.

From			To
	straight-through
10/100
Hub		PC/Server
10/100
Hub		Print Server
	crossover
10/100	when port 1 set to MDI-X
Hub			Hub or Switch
	straight-through
10/100	when port 1 set to MDI		10/100
Hub		Hub or Switch

Left (Green/Orange)	Right (Orange)
Solid Green = Link	Off = 100Mbps
Blinking Green = Activity	Solid = 10Mbps

5 6 7 8

Blinking Orange = Partition

Solid Orange = User Disabled

1