Intel 351599-005 manual For Windows 95 users \install e, Overdriv e, Processor Demo/Diagnostics

To install the software on your hard disk, insert the diskette in drive A and:

For DOS users type:

For OS/2* or Windows NT* users type from a DOS prompt:

For Windows users:

On the Command Line, type:

For Windows 95 users:

a:\install e

a:\install e

In the Program Manager, select: FILE

and then select: RUN a:setup

and click OK

From the task bar, select Start From the Start menu, select Run and at the prompt type:

\SETUP

To begin the demonstration after installing the software:

For DOS users:

For Windows NT users :

For Windows users:

For OS/2 users:

For more information, refer to Troubleshooting section, p. 26.

Go to the odp_util directory and type:

overdriv e

Go to the odp_util directory and

type from a full-screen DOS prompt:

overdriv e

Double click the icon “ OverDrive®

Processor Demo/Diagnostics”

Ensure that the following line ap- pears in your config.sys file:

VME=NO

Ensure that the settings for your DOS full-screen command prompt in- cludes the following:

HW_TIMER set to ON

From a full-screen DOS prompt type:

overdriv e

For Windows 95 users: Press e or click OK

When the Main Menu appears, select "Installation Demonstration." If instal- lation sounds complicated after viewing the installation demo and after reading through the installation sections of this manual, have a qualified technician install the Pentium OverDrive processor for you.

7