![](/images/new-backgrounds/1315253/31525341x1.webp)
Resident Diagnostics
The Fan Monitor software determines if your Pentium OverDrive processor fan is operating correctly.
If you prefer to run the software from DOS, you can run the Fan Monitor diagnostic executable file by typing the following command at the DOS prompt in the directory in which the fan monitor software is located:
C\: fanmonit e
The program then tests the fan’s operation. If the fan is functioning correctly, the following messages appear on the screen:
Pentium® OverDrive® processor detected!!
The fan on your Pentium OverDrive processor is operating properly.
If you choose to run the Fan Monitor software from Windows, the software runs continuously in the background. The software checks the fan every 60 seconds and does not affect system performance. Note that after installation, no initial messages appear, but you can view any messages by double clicking on the Fan Monitor icon.
The Fan Monitor icon automatically minimizes and appears in the lower corner of your screen after startup. The Fan Monitor icon shows that the fan is operating correctly. If a problem develops, the icon changes as shown and a message box appears on your screen.
Icon indicates fan is | Icon indicates fan |
functioning | is not functioning |
If you receive a warning or notice that the fan is not functioning correctly, first check to ensure there are no obvious problems with the fan installation, for example:
•a cable or other piece of hardware is blocking the airflow
•the fan is not making good connection or fully seated
•there is visible dirt or dust inhibiting airflow
22