User Guide XB1 COM Express Module
EMC Recommendations
In order to comply with the CE regulations for EMC, it is mandatory to observe the following rules:
CThe chassis or rack including other boards in use must comply entirely with CE
CClose all board slots not in use with a blind front panel
CFront panels must be fastened by
CCover any unused front panel mounted connector with a shielding cap
CExternal communications cable assemblies must be shielded (shield connected only at one end of the cable)
CUse ferrite beads for cabling wherever appropriate
CExternal I/O connectors may require additional isolating parts
Reccomended Accessories |
|
|
|
Blind CPCI Front | EKF Elektronik | Widths currently available | |
Panels |
| (1HP=5.08mm): | |
|
| with handle 4HP/8HP | |
|
| without handle | |
|
| 2HP/4HP/8HP/10HP/12HP | |
Ferrit Bead Filters | ARP Datacom, | Ordering No. | |
| 63115 Dietzenbach | 102 820 | (cable diameter 6.5mm) |
|
| 102 821 | (cable diameter 10.0mm) |
|
| 102 822 | (cable diameter 13.0mm) |
Metal Shielding | Ordering No. | ||
Caps | 59557 Lippstadt | CDFA 09 165 X 13129 X (DB9) | |
|
| CDSFA 15 165 X 12979 X (DB15) | |
|
| CDSFA 25 165 X 12989 X (DB25) | |
©EKF | ekf.com |
