User Guide XB1 COM Express Module
Installing and Replacing Components
Before You Begin
Warnings
The procedures in this chapter assume familiarity with the general terminology associated with industrial electronics and with safety practices and regulatory compliance required for using and
modifying electronic equipment. Disconnect | the system from its power source and from |
any telecommunication links, networks or | modems before performing any of the |
procedures described in this chapter. Failure | to disconnect power, or telecommunication |
links before you open the system or perform | any procedures can result in personal injury |
or equipment damage. Some parts of the | system can continue to operate even though |
the power switch is in its off state. |
|
Caution
Electrostatic discharge (ESD) can damage components. Perform the procedures described in this
chapter only at an ESD workstation. If such a | station is not available, you can provide |
some ESD protection by wearing an | antistatic wrist strap and attaching it to a |
metal part of the system chassis or board | front panel. Store the board only in its |
original ESD protected packaging. Retain the | original packaging (antistatic bag and |
antistatic box) in case of returning the board to EKF for rapair.
©EKF | ekf.com |
