- 24 -8S648-RZ Series Motherboard
English

CPU Hyper-Threading

Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working
for operating system with multi processors mode supported. (Default value)
Disabled Disables CPU Hyper Threading.

Init Display First

Select the first initation of monitor or display from AGP or PCI VGA card.
AGP Set Init display first to AGP. (Default value)
PCISet Init display first to PCI.
Integrated Peripherals

IDE1 Conductor Cable

AutoWill be automatically detected by BIOS. (Default value)
ATA66/100 Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE d evice
and cable is compatible with ATA66/100).
ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).

IDE2 Conductor Cable

AutoWill be automatically detected by BIOS. (Default value)
ATA66/100 Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE d evice
and cable is compatible with ATA66/100).
ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).

On-Chip Primary PCI IDE

Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.

On-Chip Secondary PCI IDE

Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
CMOS Setup Utility-Copyrig ht (C) 1984-200 4 Award Soft ware
Integrated P eripherals
IDE1 Conductor Cable [Auto]
IDE2 Conductor Cable [Auto]
On-Chip Primar y PCI IDE [Enabled]
On-Chip Second ary PCI IDE [Enabled]
AC97 Audio [Enabled]
Onboard LAN device *[Enabl ed]
USB Contro ller [Enabled]
USB Legacy Support [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x EC P Mode Use D MA 3
Game Port Add ress [201]
Midi Port Add ress [330]
Midi Port IRQ [10]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General He lp
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
Item Help
Menu Level}
[Auto]
Auto-detect IDE
cable type
[ATA66/100/1 33]
Set Conductor cable
to ATA66/100/ 133(80
-pins)
[ATA33]
Set Conductor cable
to ATA33(40-p ins)
"*" Only for 8S648-RZ.