Intel 8S648-RZ, 8S648-RZ-C - page 25

- 25 -BIOS Setup
English
"*" Only for 8S648-RZ.
AC97 Audio
Enabled Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
On Board LAN device *
Disabled Disable this function.
Enabled Enable Onboard Lan Chip device. (Default value)
USB Controller
Enabled Enable USB Controller. (Default value)
Disabled Disable USB Controller.
USB Legacy Support
When USB keyboard or mouse is installed, plea se set at Enabled.
Enabled Enable USB keyboard or mouse support.
Disabled Disable USB keyboard or mouse support. (Default value)
Onboard Serial Port 1
AutoBIOS will automatically setup the port 1 address.
3F8/IRQ4Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard Serial Port 2
AutoBIOS will automatically setup the port 2 address.
3F8/IRQ4Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3Enable onboard Serial port 2 and address is 2F8. (Default value)
3E8/IRQ4Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
Onboard Parallel port
378/IRQ7Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP Using Parallel port as Standard Parallel Port. (Default value)
EPP Using Parallel port as Enhanced Parallel Port.
ECPUsing Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
3Set ECP Mode Use DMA to 3. (Default value)
1Set ECP Mode Use DMA to 1.