7) SATA0 / SATA1 (Serial ATA Connector)
You can connect the Serial ATA device to this connector. If you wish to use RAID function, please use it in unity with BIOS and install the correct driver to have proper operation.
|
| Pin No. | Definition |
1 |
| 1 | GND |
7 | 2 | TXP | |
|
| 3 | TXN |
|
| 4 | GND |
|
| 5 | RXN |
|
| 6 | RXP |
|
| 7 | GND |
8) F_PANEL (Front Panel Connector)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassisfront panel to the F_PANEL connector according to the pin assignment below.
Message LED/Power/ |
| Soft Power |
|
|
| |
Sleep LED |
| Connector |
| Speaker Connector | ||
|
|
|
|
|
|
|
| MSG+ MSG- PW+ PW- | SPEAK+ | SPEAK- |
| 2 |
| 20 |
| 1 |
| 19 |
| HD+ HD- RES- RES+ NC |
|
|
| IDE Hard Disk Reset Switch |
| |
| Active LED |
|
|
HD (IDE Hard Disk Active LED) | Pin 1: LED anode(+) |
| |
| Pin 2: LED |
| |
SPK (Speaker Connector) | Pin 1: VCC(+) |
|
|
| Pin 2- Pin 3: NC |
|
|
| Pin 4: |
|
|
RES (Reset Switch) | Open: Normal Operation |
| |
| Close: Reset Hardware System | ||
PW (Soft Power Connector) | Open: Normal Operation |
| |
| Close: Power On/Off |
| |
MSG (Message LED/ Power/ Sleep LED) | Pin 1: LED anode(+) |
| |
| Pin 2: LED |
| |
NC | NC |
|
|
English
- 15 - | Hardware Installation Process |