Intel 945GZT ・ Smart FAN Control, ・ FAN Target Temperture, ・ FAN Min Speed, ・ Sensor Show On Post

Intel 945 SeriesUser's Manual

4.5.9 PC Health Status

Phoenix - AwardBIOS CMOS Setup Utility

PC Health Status

Smart FAN Control		[Disabled]		Item Help
x FAN	Target Temperture	30
x FAN	Min Speed	60 %		Menu Level ►
** MainBoard Temperature Items **
Sys	Temp.	28oC/ 82oF
CPU	Temp.	30oC/ 86oF
	** MainBoard Fans Items **
SYSFAN1.		0 RPM
CPU	FAN.	4218 RPM
SYSFAN2.		0 RPM
	** MainBoard Voltage Items **
CPU	VCORE	1.27	V
+ 12 V		12.09	V
+3.3 V		3.26	V
DIMM VCC		1.84	V
VCC	CHIP	1.49	V
+ 5	V	5.12	V
VBAT(V)		3.13	V
3.3VSB		3.23	V
Shutdown Temperature		[Disabled]
Sensor Show On Post		[Enabled]
→←				ESC:Exit F1:General Help
↑↓ :Move Enter:Select +/-/PU/PD:Value F10:Save
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

・Smart FAN Control

This item allows you to control the CPU fan speed. When set to [Enabled], the following items become selectable.

・FAN Target Temperture

This item sets the temperature mark for the “Smart Fan” function to take effect.

・FAN Min Speed

This item sets the speed ratio for the 4-pin CPU fan assembly connected at “CPUFAN1” fan power connector to start running.

・All Voltages, Fans Speed and Thermal Monitoring

These unchangeable items list the current status of the CPU and environment temperatures, fan speeds, and system power voltage.

・Shutdown Temperature

You can set the processor shutdown temperature here. If the processor temperature exceeds the settings value, system will force to shutdown to protect the processor not overheat.

・Sensor Show On Post

Show the system status when post.

- 33 -