Connecting Rear Panel I/O Devices, AUDIO1 | Intel 945GZ, 945GC

Intel 945 Series	User's Manual

1.4 Connecting Rear Panel I/O Devices

The rear I/O part of this mainboard provides the following I/O ports:

•PS/2 Mouse: Connect to PS/2 mouse.

•PS/2 Keyboard: Connect to PS/2 keyboard.

•LPT: Connect to printer or other devices that support this communication protocol.

•COM: Connect to external modem, mouse or other devices that support this communication protocol.

•VGA: Connect to monitor input.

•LAN: Connect to Local Area Network.

•USB: Connect to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc.

•eSATA: Connect to peripherial SATA devices.The peripherial SATA devices must connect inside SATA connectors. (Optional)

•AUDIO1:

Cen./Sub. (Center / Subwoofer): Connect to the center and subwoofer channel in the 7.1

channel audio system.

R.L./R.R. (Rear Left / Rear Right): Connect to the rear left and rear right channel in the 7.1

channel audio system.

S.L./S.R. (Surround Left / Surround Right): Connect to the surround left and surround right channel in the 7.1 channel audio system.

Line-In: Connect to the line out from external audio sources.

Line-Out: Connect to the front left and front right channel in the 7.1-channel or regular 2-channel audio system.

Mic-In: Connect to the plug from external microphone.

- -

Image 8

Intel 945GZT, 945GCT user manual Connecting Rear Panel I/O Devices, AUDIO1

Contents

Intel 945 Series Disclaimer Copyright Table of Contents Package Checklist Introduction Specifications CPU Mainboard Layout Intel 945GCV1.0 This picture is only for reference Intel 945GCV2.0 This picture is only for reference Connecting Rear Panel I/O Devices AUDIO1 Installing Mainboard Choosing a Computer Chassis Installation of the CPU and CPU Cooler Installation of the CPU Dual-Channel Memory installation For Intel 945GCV2.0 Only Installation of Memory ModulesInstallation of the CPU Cooler Connecting Peripheral Devices Floppy and IDE Disk Drive ConnectorsSerial ATA Connectors PCI and PCI Express slots Cmos Memory Clearing Header Checking Jumper SettingsKeyboard Power FunctionJKB FAN Power Connectors Front Panel Switches & Indicators Headers Additional USB Port Headers Front Panel Audio Connection Header Internal Audio Connectors ATX Power Input Connectors About Bios Setup To Run Bios SetupPost Power On Self Test About Cmos Bios Setup Cmos Setup Utility Load Fail-Safe Defaults Load Optimized DefaultsSet Supervisor Password Set User Password ・ Date mmddyy ・ Time hhmmss IDE Channel 0 Master/Slave,SATA Channel 1~4 Access Mode IDE HDD Auto-DetectionCapacity Cylinder CPU Feature Delay Prior to Thermal Execute Disable Bit ・ Quick Power On Self Test・ Boot Up Floppy Seek ・ Boot Up NumLock Status ・ Singal CPU Work Mode ・ Security Option・ MPS Version Control For OS ・ OS Select For Dram 64MB ・ System Bios Cacheable ・ Video Bios CacheablePCI-E Compliancy Mode ・ SLPS4# Assertion Width ・ Dvmt Mode ・ On-Chip Frame Buffer Size IDE HDD Block Mode IDE DMA transfer accessOnChip IDE Device On-Chip Primary PCI IDE Sata Port Speed Settings Pata IDE ModeBack to Integrated Peripherals Setup Menu Onboard Device IDE Primary Master/Slave Udma Auto Bios Write Protect Back to Integrated Peripherals Setup Menu Super IO DevicePower on Function USB Controller Parallel Port Mode EPP Mode SelectECP Mode Use DMA ・ Hot Key Power on ・ Acpi Suspend Type ・ Power Management・ Acpi Function ・ Suspend Mode ・ HDD Power Down・ Power On by Ring ・ Resume by Alarm ・ Reset configuration data ・ Init Display First・ Resource controlled by ・ IRQ Resources ・ Shutdown Temperature ・ Smart FAN Control・ FAN Target Temperture ・ FAN Min Speed ・ System Memory Control ・ CPU Voltage Regulator・ Dram Voltage Regulator ・ Auto Detect PCI Clk Set Supervisor/User Password Enter Password Password DISABLED！ Driver Installation