Intel Desktop Board DH57JG Product Guide

Follow these guidelines before you begin:

•Always follow the steps in each procedure in the correct order.

•Set up a log to record information about your computer, such as model, serial numbers, installed options, and configuration information.

•Electrostatic discharge (ESD) can damage components. Perform the procedures described in this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam pad. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis.

Installation Precautions

When you install and test the Intel Desktop Board, observe all warnings and cautions in the installation instructions.

To avoid injury, be careful of:

•Sharp pins on connectors

•Sharp pins on printed circuit assemblies

•Rough edges and sharp corners on the chassis

•Hot components (such as processors, voltage regulators, and heat sinks)

•Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure that the calculated total current loads of all the modules within the computer is less than the output current rating of each of the power supplies output circuits plus enough headroom for desktop board power consumption.

Observe Safety and Regulatory Requirements

Read and follow the instructions in this section and the instructions supplied with the chassis and associated modules. If you do not follow these instructions and the instructions provided by the chassis and module suppliers, you increase your safety risk and the possibility of noncompliance with regional laws and regulations. If the instructions for the chassis are inconsistent with these instructions or the instructions for associated modules, contact the supplier to find out how you can ensure that your computer meets safety and regulatory requirements.

For information about the Desktop Board’s regulatory compliance, refer to Appendix B.

28

Page 27 Page 29
Page 28
Image 28
Intel BLKDH57JG manual Installation Precautions, Prevent Power Supply Overload, Observe Safety and Regulatory Requirements
Page 27 Page 29

BLKDH57JG specifications

The Intel BLKDH57JG is a versatile micro ATX motherboard that is designed for Intel's second-generation Core processors. Aimed at both performance enthusiasts and casual users, this board supports the LGA 1156 socket and is built to deliver a robust computing experience.

One of the standout features of the BLKDH57JG is its support for dual-channel DDR3 memory, with a maximum capacity of 16 GB. This capability ensures that users can enjoy a significant boost in performance when running memory-intensive applications or multitasking. The motherboard supports memory speeds of up to 1600 MHz, allowing for optimal data transfer rates that enhance overall system performance.

In terms of expandability, the Intel BLKDH57JG is equipped with a range of expansion slots. It features a PCI Express 2.0 x16 slot, which is ideal for high-performance graphics cards, as well as multiple PCI Express x1 and PCI slots for additional expansion cards. This makes it suitable for gaming, video editing, and other demanding applications.

Storage options are plentiful with the BLKDH57JG, which includes six SATA II ports that support RAID configurations. This ensures that users can set up multiple drives for improved performance or data redundancy, making it easier to manage large volumes of data safely. The board also features Intel Rapid Storage Technology, which helps enhance the performance and reliability of storage devices connected to the motherboard.

Connectivity is another strong point for the BLKDH57JG. The motherboard supports Intel's latest technologies including USB 3.0, providing faster data transfer speeds for compatible devices. Additionally, it comes with integrated high-definition audio, ensuring a superior sound experience without the need for an additional sound card.

Onboard networking capabilities include Gigabit Ethernet support, offering users fast and stable internet connectivity. The inclusion of solid capacitors and advanced circuitry ensures durability and stability, making the motherboard a reliable choice for various computing needs.

Overall, the Intel BLKDH57JG combines excellent performance, expandability, and connectivity in a compact ATX form factor, making it an excellent choice for anyone looking to build a capable and reliable system.
Top Page Image Contents