Manuals / Intel / Computer Equipment / Computer Hardware

Intel cpb4612 manual Onboard Peripheral Control Descriptions, Port Control Descriptions

Models: cpb4612 cpci borard with a intel pentuim M

1 104
Download 104 pages 57.62 Kb
Page 62
Image 62

Onboard Peripheral Control Descriptions

Video Controller:

This item displays the enable/disable status of the onboard video

 

controller.

Graphics Memory Select:

Selects the amount of system memory used by the internal graphics

 

device. The choices are 1MB, 4MB, 8MB, 16MB, or 32MB.

Ethernet Controller:

This item controls the enable/disable of the 10/100 Ethernet controller.

 

The default is enabled.

Ethernet Boot ROM:

Controls the embedded Ethernet boot ROM allowing for remote network

 

booting.

Dual Gigabit Ethernet Controller: This item controls the enable/disable of the dual 10/100/1000 Ethernet controller. The default is enabled.

Gigabit Ethernet Boot ROM:

Controls the embedded gigabit Ethernet boot ROM allowing for remote

 

network booting.

Console Redirection Descriptions (Disabled by default)

Remote Access:

This item allows serial console redirection to be enabled. This allows all

 

video output to be redirected through the serial port during the POST and

 

DOS. In addition, input through the serial port will be used through the

 

POST and DOS.

Serial Port:

Specifies the serial port to be used for console redirection.

Serial Port Mode:

Selects the baud rate for console redirection. The possible baud rates

 

are: 9600, 19200, 38400, and 115200.

Flow Control:

This item allows hardware flow control to be used.

Terminal Type:

Selects between ANSI and VT100 terminal types.

VT-UTF8 Combo Key Support: Controls VT-UTF8 combination key support for ANSI and VT100

 

terminals.

Redirection After BIOS Post:

Control if console redirection is to be used after POST.

I/O Port Control Descriptions

Serial Port Address:

The three serial ports can be configured to one of four possible settings

 

or disabled.

Serial Port IRQ:

The three serial ports can be configured to one of four possible settings.

52

Page 61 Page 63
Page 62
Image 62
Intel cpb4612 manual Onboard Peripheral Control Descriptions, Console Redirection Descriptions Disabled by default
Page 61 Page 63

cpb4612, cpci borard with a intel pentuim M specifications

The Intel CPCI board equipped with the Intel Pentium M processor, specifically the CPB4612, represents a significant advancement in the realm of compact computing solutions tailored for embedded applications. This board is primarily designed to cater to industries requiring low-power, high-performance computing capabilities, such as telecommunications, medical equipment, and industrial automation.

One of the defining features of the CPB4612 board is its incorporation of the Intel Pentium M processor, known for its efficient architecture. The Pentium M operates on a low power envelope while delivering robust performance, thanks to its advanced Power Management capabilities, which can dynamically adjust frequency and voltage based on workload demands. This feature not only assists in maintaining optimal performance but also extends the operational lifespan of embedded systems by reducing unnecessary power consumption.

The CPB4612 boasts a modular design compliant with the CompactPCI (CPCI) standard, enhancing its versatility within various configurations. This modular structure allows easy integration with other CPCI-compliant boards, facilitating scalability for different application requirements. Furthermore, the board supports up to 1 GB of DDR RAM, which provides sufficient memory capacity for most embedded applications.

In terms of connectivity, the Intel CPB4612 features a wealth of interfaces including Ethernet for network connectivity, USB ports for peripheral devices, and serial ports for legacy support. This array of options ensures that the board can connect seamlessly to a variety of external devices, catering to the needs of diverse industry applications.

The board is also equipped with advanced thermal management technologies, ensuring it operates within safe temperature ranges even under heavy workloads. The design includes heat sinks and ventilation options that help dissipate heat effectively, mitigating the risk of thermal-related performance degradation.

In summary, the Intel CPCI board with the Pentium M processor, CPB4612, is an ideal choice for applications demanding a balance between power efficiency and high performance. With its modular design, ample connectivity options, and robust thermal management features, it provides a reliable and flexible solution for embedded computing needs across multiple industries. This board exemplifies Intel's commitment to innovation, allowing developers to harness the power of advanced computing in a compact form factor.