Intel Desktop Board D815EEA Product Guide

Removing the AGP Card Retention Mechanism

CAUTION

Once removed using this method, the AGP RM cannot be reused.

Follow these instructions to remove the AGP card retention mechanism:

1.Using side-cutters (A), cut the loop (B) joining the two sides of the retention mechanism.

2.Spread the sides of the retention mechanism (C) and lift the retention mechanism off of the AGP connector.

B

A

OM10113

Figure 7. Removing the AGP Card Retention Mechanism

Installing and Removing Memory

CAUTION

To be fully compliant with all applicable Intel® SDRAM memory specifications, the board requires DIMMs that support the Serial Presence Detect (SPD) data structure.

You can access the PC Serial Presence Detect Specification at:

http://www.intel.com/design/chipsets/memory/

The board has three 168-pin DIMM sockets arranged as banks 0, 1, and 2 as shown in Figure 8. The memory module requirements are listed in the Main Memory section on page 10.

28