Intel Desktop Board D815EEA Product Guide

Manufacturing Options

Table 2 describes the board’s manufacturing options.

Table 2. Manufacturing Options

Characteristic

Audio

Instantly Available Technology

Diagnostic LEDs

SCSI LED

Connector

Digital Visual Interface (DVI)

Integrated LAN

Hardware Monitor

CNR

Specification

Two separate Audio Codec ’97 (AC ’97) compatible audio subsystem options are available:

•A basic audio subsystem that includes the ICH2 component and an Analog Devices AD1885 analog codec, or

•An enhanced audio subsystem that includes a Creative Labs ES1373 AC ’97 digital controller and a Crystal Semiconductor CS4297 stereo audio codec.

•ACPI S3 Suspend to RAM (STR) sleep state

•Support for PCI Local Bus Specification Revision 2.2

•Wake on PS/2† keyboard and USB ports

Consists of four back-panel mounted LEDs

Allows add-in SCSI controllers to use the same LED as the onboard I/O controller

Interface for optional card to support Flat Panel, Digital CRT, or TV out

Intel® 82562ET supports one rear panel LAN connector with LEDs

Heceta 4 which supports the following:

•Remote diode temperature sense

•Voltage sense to detect out of range values

Communication and Networking Riser (CNR) slot. If used, mechanically precludes the use of PCI slot 5.

✏NOTE

For information about Intel® desktop boards, including technical product specifications, BIOS upgrades, and device drivers, go to the Intel World Wide Web site at:

http://support.intel.com/support/motherboards/desktop/

8