Intel D945GSEJT manual Connecting SATA Drives, Removing System Memory

Intel Desktop Board D945GSEJT Product Guide

To remove an SO-DIMM from the socket, gently spread the socket’s retention arms as shown in Figure 7 to disengage them from the SO-DIMM.

Figure 7. Removing System Memory

Connecting SATA Drives

Intel Desktop Board D945GSEJT supports two SATA drives with two data connectors. The board ships with an in-line power cable that provides:

•a right-angled female-gender 1 x 4 connector for low-profile board connectivity

•a 15-pin SATA power connector for SATA drive power

•a female-gender 1 x 4 connector for system component power flexibility

To connect a SATA drive to the Desktop Board:

1.Observe the precautions in "Before You Begin" on page 27.

2.Attach one end of the SATA data cable to a SATA connector on the board (Figure 8, A).

3.Attach the other end of the SATA data cable to the SATA drive (Figure 8, B).

4.Attach the right-angled 4-pin power connector on the power cable to the 4-pin connector on the Desktop Board (Figure 8, C).

5.Attach the SATA power connector (Figure 8, D) on the power cable to the mating connector on a SATA drive.

32