Installing and Replacing Desktop Board Components
Installing the External Serial ATA Adapter Bracket
If you are connecting the external Serial ATA (eSATA) adapter bracket to the Desktop Board, follow these instructions (see Figure 22):
1.Observe the precautions in “Before You Begin” on page 25.
2.Attach the connector at the end of the adapter cable to the red SATA connector (Figure 22, B) on the Desktop Board.
3.Secure the bracket to the chassis back panel with a screw (Figure 22, A).
NOTE
Do not use the red external SATA (eSATA) connector to connect to an internal SATA drive.
Figure 22. Connecting the External Serial ATA Adapter Bracket
45
