|
|
| Contents |
A | Error Messages and Indicators |
| |
| BIOS Beep Codes | 69 | |
| BIOS Error Messages | 69 | |
B | Regulatory Compliance |
| |
| Safety Regulations | 71 | |
|
| Place Battery Marking | 71 |
| European Union Declaration of Conformity Statement | 72 | |
| Product Ecology Statements | 74 | |
|
| Recycling Considerations | 74 |
|
| 76 | |
| EMC Regulations | 78 | |
|
| Ensure Electromagnetic Compatibility (EMC) Compliance | 79 |
| Product Certifications | 80 | |
|
| 80 | |
|
| Chassis and Component Certifications | 81 |
Figures |
| ||
| 1. | Desktop Board DG33TL Components | 11 |
| 2. | LAN Connector LEDs | 17 |
| 3. | Location of the Standby Power Indicator | 23 |
| 4. | Installing the I/O Shield | 27 |
| 5. | Desktop Board DG33TL Mounting Screw Hole Locations | 28 |
| 6. | Lift the Socket Lever | 29 |
| 7. | Lift the Load Plate | 30 |
| 8. | Remove the Protective Socket Cover | 30 |
| 9. | Remove the Processor from the Protective Processor Cover | 31 |
| 10. | Install the Processor | 31 |
| 11. | Close the Load Plate | 32 |
| 12. | Connecting the Processor Fan Heat Sink Cable to the Processor Fan Header | 33 |
| 13. | Dual Channel Memory Configuration with Two DIMMs | 35 |
| 14. | Dual Channel Memory Configuration with Four DIMMs | 35 |
| 15. | Dual Channel Memory Configuration with Three DIMMs | 36 |
| 16. | Use DDR2 DIMMs | 37 |
| 17. | Installing a DIMM | 38 |
| 18. | Installing a PCI Express x16 Card | 40 |
| 19. | Removing a PCI Express x16 Card | 41 |
| 20. | Connecting the IDE Cable | 43 |
| 21. | Connecting a Serial ATA Cable | 44 |
| 22. | Connecting the External Serial ATA Adapter Bracket | 45 |
| 23. | Internal Headers | 46 |
| 24. | Back Panel Audio Connectors | 51 |
| 25. | Location of the Chassis Fan Headers | 52 |
| 26. | Connecting Power Supply Cables | 53 |
| 27. | Location of the BIOS Configuration Jumper Block | 54 |
| 28. | Removing the Battery | 61 |
vii
