Intel DG45ID Regulatory Compliance, Safety Standards, Place Battery Marking, Regulation Title

B Regulatory Compliance

This appendix contains the following regulatory compliance information for Desktop Board DG45ID:

•Safety standards

•European Union Declaration of Conformity statement

•Product Ecology statements

•Electromagnetic Compatibility (EMC) regulations

•Product certifications

Safety Standards

Desktop Board DG45ID complies with the safety standards stated in Table 19 when correctly installed in a compatible host system.

Table 19. Safety Standards

Regulation	Title
CSA/UL 60950-1, First	Information Technology Equipment – Safety - Part 1: General
Edition	Requirements (USA and Canada)
EN 60950-1:2006, Second	Information Technology Equipment – Safety - Part 1: General
Edition	Requirements (European Union)
IEC 60950-1:2005, Second	Information Technology Equipment – Safety - Part 1: General
Edition	Requirements (International)

Place Battery Marking

There is insufficient space on this Desktop Board to provide instructions for replacing and disposing of the Lithium ion coin cell battery. For system safety certification, the statement below or an equivalent statement is required to be permanently and legibly marked on the chassis near the battery.

CAUTION

Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.

A suitable caution label is included with Desktop Board DG45ID.

For information about replacing the battery, go to page 54.

73