Desktop Board Features

Software Support

ACPI

ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. The use of ACPI with the Desktop Board requires an operating system that provides full ACPI support.

Hardware Support

Power Connectors

ATX12V-compliant power supplies can turn off the computer power through system control. When an ACPI-enabled computer receives the correct command, the power supply removes all non-standby voltages.

When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (either on or off). The computer’s response can be set by using the Last Power State feature in the BIOS Setup program’s Boot menu.

The Desktop Board has two power connectors. See Figure 23 on page 51 for the location of the power connectors.

Fan Headers

The function/operation of the fans is as follows:

The fans are on when the board is in the ACPI S0 state.

The fans are off when the computer is in the ACPI S3, S4, or S5 state.

Each fan header is wired to a tachometer input.

All fan headers support closed-loop fan control that can adjust the fan speed or switch the fan on or off as needed.

All fan headers have a +12 V DC connection (up to 12 V DC when using 3-wire chassis fans).

All fan headers are controlled by Pulse Width Modulation.

The chassis fan header supports linear fan control on 3-wire fans.

The Desktop Board has a 4-pin processor fan header and two 4-pin chassis fan headers compatible with 4-wire and 3-wire chassis fans.

LAN Wake Capabilities

CAUTION

For LAN wake capabilities, the 5 V standby line for the power supply must be capable of delivering adequate +5 V standby current. Failure to provide adequate standby current when using this feature can damage the power supply.

LAN wakeup capabilities enable remote wake-up of the computer through a network. The LAN subsystem monitors network traffic and upon detecting a Magic Packet* frame, it asserts a wake-up signal that powers up the computer.

23

Page 23
Image 23
Intel G13841-001, BLKDH67GDB3 manual Software Support, Hardware Support

G13841-001, BLKDH67GDB3, DH67GD specifications

The Intel DH67GD motherboard, also known by the model number BLKDH67GDB3, is a high-performance motherboard designed primarily for Intel’s second-generation Core processors, also known as the "Sandy Bridge" architecture. This motherboard is particularly well-suited for users seeking a blend of performance, advanced features, and compatibility, making it a popular choice for both desktop builds and upgrades.

One of the standout features of the DH67GD is its support for Intel's latest processing technology, allowing for dual-channel DDR3 memory with speeds of up to 1333/1600 MHz. This enables improved memory bandwidth and responsiveness, essential for multitasking and demanding applications. The motherboard supports a maximum memory capacity of 32GB, ensuring ample RAM for gaming, content creation, and other intensive tasks.

The DH67GD is equipped with a variety of connectivity options, featuring four SATA II ports for connecting hard drives and SSDs, alongside two SATA III ports that support faster data transfer speeds. Users can benefit from rapid storage access, which is crucial for modern applications and operating systems. Additionally, the inclusion of RAID 0, 1, 5, and 10 support enhances data redundancy and performance, appealing to users who prioritize data safety.

Graphics capabilities are robust, with support for Intel HD Graphics integrated into the supported processors. The motherboard provides HDMI, DVI, and VGA outputs, ensuring compatibility with a wide range of displays. This flexibility allows for a straightforward transition to high-definition multimedia applications without necessitating a discrete graphics card.

The DH67GD also incorporates several modern technologies, including Intel Smart Connect Technology, which allows for seamless synchronization of applications and data while the system is in sleep mode. The board supports USB 3.0 for rapid file transfers and external device connectivity, significantly outpacing earlier USB standards.

Moreover, the Intel DH67GD motherboard is characterized by its reliable build quality and straightforward BIOS, which aids in easy setup and configuration. The board features ample expansion slots, including PCI Express x16 for graphics cards and PCI Express x1 for add-in cards, providing users the flexibility to upgrade their systems according to their needs.

In summary, the Intel DH67GD, BLKDH67GDB3, G13841-001 motherboard combines a strong set of features, modern technologies, and excellent compatibility with Intel's second-generation processors, making it a solid choice for both casual and power users alike.