Intel 2804080 Advanced Bios Features, CPU Feature, Hard Disk Boot Priority, Virus Warning

BIOS SETUP

Advanced BIOS Features

This section allows you to configure and improve your system and allows you to set up some system features according to your preference.

Phoenix - AwardBIOS CMOS Setup Utility

Advanced BIOS Features

CPU Feature		Press Enter
Hard Disk Boot Priority		Press Enter
Virus Warning		Disabled
CPU L1 and L2 Cache		Enabled
Quick Power On Self Test		Enabled
First Boot Device		Floppy
Second Boot Device		Hard Disk
Third Boot Device		CDROM
Boot Other Device		Enabled
Swap Floppy Drive		Disabled
Boot Up Floppy Seek		Disabled
Boot Up NumLock Status		On
Gate A20 Option		Fast
Typematic Rate Setting		Disabled
Typematic Rate (Chars/Sec)	6
Typematic Delay (Msec)	250
Security Option		Setup
APIC Mode		Enabled
MPS Version Control for OS	1.4
OS Select For DRAM>64MB		Non-OS2
Report No FDD For WIN 95		Yes
Small Logo (EPA) Show		Enabled

ITEM HELP

Menu Level >

CPU Feature

Press Enter to configure the settings relevant to CPU Feature.

Hard Disk Boot Priority

With the field, there is the option to choose, aside from the hard disks connected, ￿Bootable add-in Cards￿ which refers to other external devices.

Virus Warning

If this option is enabled, an alarm message will be displayed when trying to write on the boot sector or on the partition table on the disk, which is typical of the virus.

CPU L1 and L2 Cache

Cache memory is additional memory that is faster than conventional DRAM (system memory). CPUs from 486-type on up contain internal cache memory, and most, but not all, modern PCs have additional (external) cache memory. When the CPU requests data, the system transfers the requested data from the main DRAM into cache memory, for even faster access by the CPU. These allow you to enable (speed up memory access) or disable the cache function.

2804080 User’s Manual 33