Intel 2804080 Power Management Setup, ACPI Function, ACPI Suspend, RUN VGABIOS if S3 Resume

BIOS SETUP

Power Management Setup

Phoenix - AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Function

ACPI Suspend

RUN VGABIOS if S3 Resume Power Management

Video Off Method Off In Suspend Type

Modem Use IRQ

Suspend Mode

HDD Power Down

Soft-Off by PWR-BTTN

Wake-Up by PCI Card

Power On by Ring

Resume by Alarm

Date (of Month) Alarm

Time (hh:mm:ss) Alarm

** Reload Global Timer Events ** Primary IDE 0

Primary IDE 1 Secondary IDE 0 Secondary IDE 1 FDD, COM, LPT Port PCI PIRQ[A-D] #

Enabled

S1(POS) Auto User Define DPMS Video Yes Suspend Stop Grant 3 Disabled Disabled Instant-Off Disabled Disabled Disabled

0

0 : 0 : 0

Disabled

Disabled

Disabled

Disabled

Disabled

Disabled

ITEM HELP

Menu Level >

ACPI Function

Enable this function to support ACPI (Advance Configuration and Power Interface).

ACPI Suspend

The default setting of the ACPI Suspend mode is S1(POS).

RUN VGABIOS if S3 Resume

The default setting of this field is Auto.

Power Management

This field allows you to select the type of power saving management modes. There are four selections for Power Management.

Min. Power Saving	Minimum power management
Max. Power Saving	Maximum power management.
User Define	Each of the ranges is from 1 min. to
	1hr. Except for HDD Power Down
	which ranges from 1 min. to 15 min.

2804080 User’s Manual 43