BIOS SETUP
Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function | Enabled |
ACPI Suspend | S1(POS) |
RUN VGABIOS if S3 Resume | Auto |
Power Management | User Define |
Video Off Method | DPMS |
Video Off In Suspend | Yes |
Suspend Type | Stop Grant |
Modem Use IRQ | 3 |
Suspend Mode | Disabled |
HDD Power Down | Disabled |
Disabled | |
Power On by Ring | Disabled |
Resume by Alarm | Disabled |
Date (of Month) Alarm | 0 |
Time (hh:mm:ss) Alarm | 0 : 0 : 0 |
** Reload Global Timer Events ** | Disabled |
Primary IDE 0 | |
Primary IDE 1 | Disabled |
Secondary IDE 0 | Disabled |
Secondary IDE 1 | Disabled |
FDD, COM, LPT Port | Disabled |
PCI | Disabled |
|
|
ITEM HELP
Menu Level >
ACPI Function
Enable this function to support ACPI (Advance Configuration and Power Interface).
ACPI Suspend
The default setting of the ACPI Suspend mode is S1(POS).
RUN VGABIOS if S3 Resume
The default setting of this field is Auto.
Power Management
This field allows you to select the type of power saving management modes. There are four selections for Power Management.
Min. Power Saving | Minimum power management |
Max. Power Saving | Maximum power management. |
User Define | Each of the ranges is from 1 min. to |
| 1hr. Except for HDD Power Down |
| which ranges from 1 min. to 15 min. |
ET900 User’s Manual | 27 |
