![](/images/backgrounds/110296/110296-10828x1.png)
mP4G/mP4GL Series Motherboard
Other USB Ports:
Connecting a port bracket to JUSB1 provides two additional USB ports.
JUSB3 is a single port for connecting internal de- vices.
Onboard USB Port Connector JUSB1 & Connector JUSB3
Function: Connector for the additional two USB ports port bracket. JUSB3 is an onboard internal USB 2.0 port.
Description: Connecting an external
JUSB3 is a port mounted directly on the board for connecting internal USB 2.0 devices.
More Information: See the “Connecting Internal Periph- erals” section of Chapter 5.
| JUSB1 USB port bracket |
JUSB1 | |
| JUSB3 USB internal port |
JUSB3 |
|
IR Connector JP1:
The IR connector is for both IrDA and ASKIR port modules. You must use the CMOS Setup Utility to configure the board to use the IR feature.
IR Connector JP1
Function: Connector for an Infrared (IR) port module.
Description: The IR connector supports both IrDA and ASKIR infrared port modules. Follow the module’s instructions to install it.
More Information: Please see the Integrated Peripherals section of “Configuring the CMOS Setup Utility” in Chapter 5 for information.:
IR connector JP1
Pin1
JP1
2•14 | User’s Manual |