11
Hardware Installation Process
Step1-2: Installing Heat Sink
Fig.1
Please apply heatsink paste on the surface of
the installed CPU.
Fig. 2
( to remove the heatsink, turning the push pin along
the direction of arrow; and reverse the previous
step to install the heat sink.)
Please note the direction of arrow sign on the male
push pin doesn't face inwards before installation.
(This instruction is only for Intel boxed fan)
Fig. 3
Place the heatsink on top the CPU and make
sure the push pins align to the pin hole on the
motherboard.Push down the push pins
diagonally.
Fig. 4
Please make sure the Male and Female push pin
are brought together. (for detailed installation
instructions, please refer to the heatsink installation
section of the user manual)
Male Push Pin
Female Push Pin
The top of Female Push Pin
Fig. 6
Attach the power connector of the heatsink to the
CPU fan header located on the motherboard.
Fig. 5
Please check the back side of teh motherboard.
Make sure the push pin is seated firmly as the
picture shown. Installation completed.