Manuals / Intel / Computer Equipment / Computer Hardware

Intel GA-8I915G-MFD user manual Installation of the CPU and Heatsink

Models: GA-8I915G-MFD

1 80
Download 80 pages 13.77 Kb
Page 12
Image 12

English

1-3 Installation of the CPU and Heatsink

Before installing the CPU, please comply with the following conditions:

1.Please make sure that the motherboard supports the CPU.

2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU.

3.Please add an even layer of heat sink paste between the CPU and heatsink.

4.Please make sure the heatsink is installed on the CPU prior to system use, otherwise overheating and permanent damage of the CPU may occur.

5.Please set the CPU host frequency in accordance with the processor specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the required standards for the peripherals. If you wish to set the frequency beyond the proper specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc.

HT functionality requirement content :

Enabling the functionality of Hyper-Threading Technology for your computer system requires all of the following platform components:

-CPU: An Intel® Pentium 4 Processor with HT Technology

-Chipset: An Intel® Chipset that supports HT Technology

-BIOS: A BIOS that supports HT Technology and has it enabled

-OS: An operation system that has optimizations for HT Technology

1-3-1 Installation of the CPU

 

 

 

Fig. 1

 

Fig. 2

 

 

Metal Lever

Gently lift the metal

 

Remove the plastic

 

 

 

 

 

 

lever located on the

covering on the CPU

 

 

 

CPU socket to the

 

socket.

 

 

 

upright position.

 

 

 

 

 

Fig. 3

 

Fig. 4

 

 

 

Notice the small gold

Once the CPU is

 

 

 

colored triangle located

properly inserted,

 

 

 

on the edge of the CPU

please replace the

 

 

 

socket. Align the

 

load plate and

 

 

 

indented corner of the

push the metal lever

 

 

 

 

 

back into its original

CPU with the triangle and gently insert the CPU into

position.

position. (Grasping the CPU firmly between your

 

thumb and forefinger, carefully place it into the socket

 

in a straight and downwards motion. Avoid twisting or

 

bending motions that might cause damage to the CPU

 

during installation.)

 

 

 

 

 

 

 

 

GA-8I915G-MFD Motherboard

- 12 -

 

Page 11 Page 13
Page 12
Image 12
Intel GA-8I915G-MFD user manual Installation of the CPU and Heatsink
Page 11 Page 13

GA-8I915G-MFD specifications

The Intel GA-8I915G-MFD is an advanced motherboard designed for users seeking stability, performance, and a range of modern features. Engineered by Gigabyte, this motherboard supports the Intel LGA 775 socket, making it compatible with various Intel processors, including the Pentium 4 and Pentium D series. One of its key features is the Intel 915G chipset, which provides robust support for memory and graphics capabilities.

One of the standout characteristics of the GA-8I915G-MFD is its support for DDR2 memory technology. The motherboard can accommodate up to 4GB of DDR2 RAM across its four DIMM slots, enabling improved multitasking and overall system performance compared to its predecessors that used DDR. This support for DDR2 helps in enhancing data transfer rates while maintaining lower voltage requirements, promoting energy efficiency.

Graphics performance is boosted by the integrated Intel Graphics Media Accelerator 900. This onboard GPU is capable of handling tasks like video playback and casual gaming, bolstering its appeal for users who do not require high-end graphics cards. For users who need additional graphics power, the motherboard also comes with a PCI Express x16 slot, allowing for the installation of dedicated graphics cards, thereby accommodating more demanding applications and gaming scenarios.

The GA-8I915G-MFD also offers multiple connectivity options, including four SATA ports for storage devices. This feature allows for faster data transfer rates compared to traditional IDE drives and enables users to set up RAID configurations for enhanced performance and redundancy. Additionally, the motherboard supports high-speed USB 2.0 ports, ensuring that users can connect a plethora of peripherals.

In terms of audio capabilities, the motherboard is equipped with an integrated 5.1 channel audio codec, providing clear sound quality for gaming, media consumption, and communication. This built-in sound solution eliminates the need for additional sound cards for most users.

Another notable characteristic of the GA-8I915G-MFD is its stability and reliability, making it suitable for both home and office environments. This motherboard features extensive power management options and durable components, ensuring it withstands prolonged usage. Overall, the Intel GA-8I915G-MFD stands out as a well-rounded motherboard, providing a solid foundation for building a capable and efficient computing system.