Intel GA-8I915G-MFD Power Management Setup, Parallel Port Mode, ECP Mode Use DMA, English, S1POS

Parallel Port Mode

SPP	Using Parallel port as Standard Parallel Port. (Default value)
EPP	Using Parallel port as Enhanced Parallel Port.
ECP	Using Parallel port as Extended Capabilities Port.
ECP+EPP	Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
3	Set ECP Mode Use DMA to 3. (Default value)
1	Set ECP Mode Use DMA to 1.

2-4	Power Management Setup
			CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
				Power Management Setup
	ACPI Suspend Type			[S1(POS)]		Item Help
	Soft-Off by PWR-BTTN			[Instant-off]		Menu Level`
	PME Event Wake Up			[Enabled]
	Power On by Ring			[Enabled]
	Resume by Alarm			[Disabled]
x	Date (of Month) Alarm			Everyday
x	Time (hh:mm:ss) Alarm			0 : 0 : 0
	Power On By Mouse			[Disabled]
	Power On By Keyboard			[Disabled]
x	KB Power ON Password			Enter
	AC BACK Function			[Soft-Off]
KLJI: Move		Enter: Select		+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values			F6: Fail-Safe Default		F7: Optimized Defaults
	ACPI Suspend Type
	S1(POS)		Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
	S3(STR)		Set ACPI suspend type to S3/STR(Suspend To RAM).
	Soft-off by PWR-BTTN
	Instant-off		Press power button then Power off instantly. (Default value)
	Delay 4 Sec.		Press power button 4 sec. to Power off. Enter suspend if button is pressed
			less than 4 sec.
	PME Event Wake Up
	Disabled		Disable this function.
	Enabled		Enable PME Event Wake up. (Default value)
	Power On by Ring
	Disabled		Disable Power on by Ring function.
	Enabled		Enable Power on by Ring function. (Default value)

English

- 39 - BIOS Setup