4-1-4 2- / 4- / 6- / 8- Channel Audio Introduction
This motherboard comes with three audio jacks. To set up multi- channel surround sound, install an additional 5.1/7.1 surround cable (optional) and enable the feature through the audio driver.
English
Installing the 5.1/7.1 Surround Cable (Optional)
The 5.1/7.1 Surround Cable provides center/ subwoofer speaker out, rear speaker out, and side speaker out audio jacks. To set up
Step:
1.Connect the 5.1/7.1 surround cable connector to the HDA_SUR header on the motherboard.
2.Secure the cable's metal bracket to the chassis back panel with a screw.
Audio Jacks Introduction
The optional 5.1/7.1 surround cable adds additional 3 audio jacks to the 3 onboard audio jacks. The picture to the right shows the default speaker set- tings for the 6 audio jacks. The jack retasking capability of HD Audio allows users to change the function for each jack through the audio driver. For example, if a rear speaker is plugged into the center/subwoofer speaker out jack, you can reconfigure the center/subwoofer speaker out jack to function as a rear speaker out jack.
Line In
Line Out
(Front Speaker
Out)
Mic In °¼³â¥z ¿é¥X
Onboard Audio
Jacks
Center/Subwoofer
Speaker Out
R e a r S p e a k e r
Out
Side Speaker
Out
Audio Jacks on 5.1/7/1 Surround Cable
For the microphone to work correctly, you MUST connect it to either the default Mic In jack or the Line In jack and configure it in the audio driver.
- 65 -Appendix
