English
Standard CMOS Features |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) | Wed, Apr 12 2006 | Item Help | |||
| Time (hh:mm:ss) | 14:31:24 |
| Menu Level` | ||
` IDE Channel 0 Master | [None] |
| Change the day, month, | |||
` IDE Channel 0 Slave | [None] |
| year |
| ||
` IDE Channel 2 Master | [None] |
|
|
| ||
` IDE Channel 2 Slave | [None] |
| <Week> |
| ||
` IDE Channel 3 Master | [None] |
| Sun. to Sat. | |||
` IDE Channel 3 Slave | [None] |
| <Month> | |||
|
|
|
|
| ||
| Drive A |
| [1.44M, 3.5"] | Jan. to Dec. | ||
| Floppy 3 Mode Support | [Disabled] |
| <Day> |
| |
|
|
|
|
|
| |
| Halt On |
| [All, But Keyboard] | 1 to 31 (or maximum | ||
| Base Memory |
| 640K |
| allowed in the month) | |
|
|
|
|
| ||
| Extended Memory | 239M |
| <Year> |
| |
|
|
|
|
| 1999 to 2098 | |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
Date
The date format is <week>, <month>, <day>, <year>.
Week | The week, from Sun to Sat, determined by the BIOS and is display only |
Month | The month, Jan. Through Dec. |
Day | The day, from 1 to 31 (or the maximum allowed in the month) |
Year | The year, from 1999 through 2098 |
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0 Master/Slave
IDE HDD
IDE Channel 0 Master/Slave
IDE devices setup. You can use one of three methods:
• Auto | Allows BIOS to automatically detect IDE devices during POST. (Default value) |
• None | Select this if no IDE devices are used and the system will skip the automatic |
| detection step and allow for faster system start up. |
• Manual | User can manually input the correct settings. |
Access Mode | Use this to set the access mode for the hard drive. The four options are: |
| CHS/LBA/Large/Auto(default:Auto) |
Capacity | Capacity of currectly installed hard drive. |
IDE Channel 2, 3 Master/Slave
IDE HDD 
Extended IDE Drive You can use one of the two methods:
• Auto | Allows BIOS to automatically detect IDE devices during POST(default) | |
• None | Select this if no IDE devices are used and the system will skip the automatic | |
| detection step and allow for faster system start up. | |
Access Mode | Use this to set the access mode for the hard drive. The two options are: | |
| Large/Auto(default:Auto) |
|
|
| |
- 32 - | ||
