
11)PWR_LED (Optional)
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.
| Pin No. | Definition |
1 | 1 | MPD+ |
| 2 | MPD- |
| 3 | MPD- |
12)F_PANEL (Front Panel Jumper)
Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front panel to the F_PANEL connector according to the pin assignment below.
| Message LED/ |
|
| Speaker Connector | |
|
| Power |
|
| |
| Power/ |
|
|
| |
| Sleep LED |
| Switch |
|
|
| MSG+ MSG- PW+ PW- | SPEAK+ | SPEAK- | ||
| 2 |
|
|
| 20 |
| 1 |
|
|
| 19 |
| HD- |
| RES+ |
|
|
| HD+ | RES- | NC |
|
|
|
| Reset Switch |
| ||
| IDE Hard Disk Active LED |
| |||
HD (IDE Hard Disk Active LED) (Blue) | Pin 1: LED anode(+) |
|
| ||
| Pin 2: LED |
| |||
SPEAK (Speaker Connector) (Amber) | Pin 1: Power |
|
|
| |
| Pin 2- Pin 3: NC |
|
| ||
| Pin 4: |
|
|
| |
RES (Reset Switch) (Green) | Open: Normal |
|
|
| |
| Close: Reset Hardware System | ||||
PW (Power Switch) (Red) | Open: Normal |
|
|
| |
| Close: Power On/Off |
|
| ||
MSG(Message LED/Power/Sleep LED) | Pin 1: LED anode(+) |
|
| ||
(Yellow) | Pin 2: LED |
| |||
NC ( Purple) | NC |
|
|
|
|
English
- 23 - | Hardware Installation |