Sata RAID / Ahci Mode, On-Chip Sata Mode

SATA RAID / AHCI Mode

RAID	Set the onboard SATA controller to RAID mode. (Default value)
AHCI	Set the onboard SATA controller to AHCI mode. Advanced Host
	Controller Interface (AHCI) is an interface specification that allows the
	storage driver to enable advanced Serial ATA features such as Native
	Command Queuing and hot plug. For more details about AHCI, please
	visit Intel's website.
Disabled	Set the onboard SATA controller to IDE mode.

Disabled	Disable this function.
Auto	BIOS will auto detect. (Default value)
Combined	Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on
	the motherboard; 2 for SATA and the other for PATA IDE.
Enhanced	Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
	HDDs to use.
Non-Combined	Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
	PATA mode.

Ch.1	Master/Slave	Set PATA IDE to Ch. 1 Master/Slave. (Default value)
Ch.0	Master/Slave	Set PATA IDE to Ch. 0 Master/Slave.

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 1 Master/Slave,this function will auto set to Ch. 0 Master/Slave.

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/Slave.

Enabled	Enable USB Controller. (Default value)
Disabled	Disable USB Controller.

Disable this function if you are not using onboard USB 2.0 feature.

Enabled	Enable USB 2.0 Controller. (Default value)
Disabled	Disable USB 2.0 Controller.

Enabled	Enable USB Keyboard Support.
Disabled	Disable USB Keyboard Support. (Default value)

Enabled	Enable USB Mouse Support.
Disabled	Disable USB Mouse Support. (Default value)

Auto	Auto detect Azalia audio function. (Default value)
Disabled	Disable Azalia audio function.
Only for GA-8I945P Pro.

	- 37 -	BIOS Setup