1-3-2 Installation of the Heatsink

Male Push Pin

The top of Female Push Pin

Female Push Pin

English

Fig.1

Please apply an even layer of heatsink paste on the surface of the installed CPU.

Fig. 3

Place the heatsink atop the CPU and make sure the push pins aim to the pin hole on the motherboard.Pressing down the push pins diagonally.

Fig. 5

Please check the back of motherboard after installing. If the push pin is inserted as the picture, the installation is complete.

Fig. 2

(Turning the push pin along the direction of arrow is to remove the heatsink, on the contrary, is to install.) Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel boxed fan)

Fig. 4

Please make sure the Male and Female push pin are joined closely. (for detailed installation instructions, please refer to the heatsink installation section of the user manual)

Fig. 6

Finally, please attach the power connector of the heatsink to the CPU fan header located on the motherboard.

The heatsink may adhere to the CPU as a result of hardening of the heatsink paste.To prevent such an occurrence, it is suggested that either thermal tape rather than heat sink paste be used for heat dissipation or using extreme care when removing the heatsink.

- 13 -

Hardware Installation

Page 13
Image 13
Intel GA-8I955X PRO, GA-8I955X ROYAL user manual Installation of the Heatsink

GA-8I955X PRO, GA-8I955X ROYAL specifications

The Intel GA-8I955X ROYAL and GA-8I955X PRO motherboards were popular choices in the mid-2000s, built for users seeking robust performance and reliability. These motherboards were designed to support the Intel Pentium 4 processors and featured the Intel 955X chipset, which enhanced overall performance and enabled advanced technologies.

One of the main features of both board models was their support for dual-core and hyper-threading technologies, maximizing the processing capabilities for multitasking and resource-hungry applications. This made them suitable for gaming, multimedia editing, and other demanding applications. Additionally, the GA-8I955X boards supported front-side bus speeds of up to 800 MHz, providing a fast data transfer rate between the CPU and memory.

With support for DDR2 memory, these motherboards accommodated memory speeds ranging from 533 to 800 MHz, facilitating improved bandwidth and performance compared to previous DDR technology. The boards also featured four DIMM slots, allowing for substantial RAM configurations, which was advantageous for users aiming for high performance in gameplay and resource-intensive tasks.

The GA-8I955X ROYAL provided additional high-end features such as integrated 7.1-channel HD audio and Gigabit LAN connectivity, enriching user experiences with superior audio and fast internet connections. The PRO variant offered similar functionalities but differed slightly in its integrated components.

Both models were equipped with multiple PCI Express slots, enabling users to enhance their systems with high-performance graphics cards and expansion cards. The user-oriented design included features such as easy BIOS updates and a user-friendly interface, ensuring that both novice and seasoned builders could navigate the setup process with ease.

Storage options were plentiful, as these motherboards supported SATA ports for connecting modern hard drives and SSDs. The RAID capabilities allowed users to implement data redundancy or performance improvements, enhancing data security and access speeds.

Overall, the Intel GA-8I955X ROYAL and GA-8I955X PRO motherboards represented a blend of performance, advanced technology, and user-friendly features, catering to the needs of gamers and power users in their day. As part of the Intel legacy, they laid the groundwork for advancements in computing technologies that have continued to evolve in subsequent years.