English

4-2 Troubleshooting

Below is a collection of general asked questions. To check general asked questions based on a specific motherboard model, please log on to www.gigabyte.com.tw

Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why?

Answer: Some advanced options are hidden in new BIOS version. Please press Ctrl and F1 keys after entering BIOS menu and you will be able to see these options.

Questions 2: Why is the light of my keyboard/optical mouse still on after computer shuts down?

Answer: In some boards, a small amount of electricity is kept on standby after computer shuts down and that's why the light is still on.

Question 3: How do I clear CMOS?

Answer: If your board has a Clear CMOS jumper, please refer to the Clear CMOS steps in the manual. If your board doesn't have such jumper, you can take off the on-board battery to leak voltage to clear CMOS. Please refer to the steps below:

Steps:

1.Turn off power.

2.Disconnect the power cord from MB.

3.Take out the battery gently and put it aside for about 10 minutes (Or you can use a metal object to connect the positive and negative pins in the battery holder to makethem short for one minute).

4.Re-insert the battery to the battery holder.

5.Connect power cord to MB again and turn on power.

6.Press Del to enter BIOS and load Fail-Safe Defaults(or load Optimized Defaults).

7.Save changes and reboot the system.

Question 4: Why do I still get a weak sound after turning up the speaker to the maximum volume?

Answer: Please make sure the speaker you are using is equipped with an internal amplifier. If not, please change another speaker with power/amplifier and try again later.

Question 5: Sometimes I hear different continuous beeps from computer after system boots up. What do these beeps usually stand for?

Answer: The beep codes below may help you identify the possible computer problems. However, they are only for reference purposes. The situations might differ from case to case.

AMI BIOS Beep Codes

*Computer gives 1 short beep when system boots successfully. *Except for beep code 8, these codes are always fatal.

1 beep Refresh failure

2 beeps Parity error

3 beeps Base 64K memory failure

4 beeps Timer not operational

5 beeps Processor error

6 beeps 8042 - gate A20 failure

7 beeps Processor exception interrupt error

8 beeps Display memory read/write failure

9 beeps ROM checksum error

10 beeps CMOS shutdown register read/write error

11 beeps Cache memory bad

GA-8I955X Royal/GA-8I955X Pro Motherboard - 82 -

AWARD BIOS Beep Codes

1 short: System boots successfully

2 short: CMOS setting error

1 long 1 short: DRAM or M/B error

1 long 2 short: Monitor or display card error

1 long 3 short: Keyboard error

1 long 9 short: BIOS ROM error

Continuous long beeps: DRAM error

Continuous short beeps: Power error

Page 81 Page 83
Page 82
Image 82
Intel GA-8I955X ROYAL, GA-8I955X PRO user manual Troubleshooting
Page 81 Page 83

GA-8I955X PRO, GA-8I955X ROYAL specifications

The Intel GA-8I955X ROYAL and GA-8I955X PRO motherboards were popular choices in the mid-2000s, built for users seeking robust performance and reliability. These motherboards were designed to support the Intel Pentium 4 processors and featured the Intel 955X chipset, which enhanced overall performance and enabled advanced technologies.

One of the main features of both board models was their support for dual-core and hyper-threading technologies, maximizing the processing capabilities for multitasking and resource-hungry applications. This made them suitable for gaming, multimedia editing, and other demanding applications. Additionally, the GA-8I955X boards supported front-side bus speeds of up to 800 MHz, providing a fast data transfer rate between the CPU and memory.

With support for DDR2 memory, these motherboards accommodated memory speeds ranging from 533 to 800 MHz, facilitating improved bandwidth and performance compared to previous DDR technology. The boards also featured four DIMM slots, allowing for substantial RAM configurations, which was advantageous for users aiming for high performance in gameplay and resource-intensive tasks.

The GA-8I955X ROYAL provided additional high-end features such as integrated 7.1-channel HD audio and Gigabit LAN connectivity, enriching user experiences with superior audio and fast internet connections. The PRO variant offered similar functionalities but differed slightly in its integrated components.

Both models were equipped with multiple PCI Express slots, enabling users to enhance their systems with high-performance graphics cards and expansion cards. The user-oriented design included features such as easy BIOS updates and a user-friendly interface, ensuring that both novice and seasoned builders could navigate the setup process with ease.

Storage options were plentiful, as these motherboards supported SATA ports for connecting modern hard drives and SSDs. The RAID capabilities allowed users to implement data redundancy or performance improvements, enhancing data security and access speeds.

Overall, the Intel GA-8I955X ROYAL and GA-8I955X PRO motherboards represented a blend of performance, advanced technology, and user-friendly features, catering to the needs of gamers and power users in their day. As part of the Intel legacy, they laid the groundwork for advancements in computing technologies that have continued to evolve in subsequent years.
Top Page Image Contents