PC Health Status |
|
|
|
| ||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| PC Health Status |
|
| |
| Reset Case Open Status | [Disabled] |
| Item Help | ||
| Case Opened |
| No |
| Menu Level` | |
| Vcore |
| 1.394V |
|
| |
| DDR18V |
| 1.840V |
|
| |
| +3.3V |
| 3.392V |
|
| |
| +12V |
| 12.175V |
|
| |
| Current CPU Temperature | 42oC |
|
|
| |
| Current CPU FAN Speed | 2986 RPM |
|
| ||
| Current SYSTEM FAN Speed | 0 | RPM |
|
| |
| CPU Warning Temperature | [Disabled] |
|
| ||
| CPU FAN Fail Warning | [Disabled] |
|
| ||
| SYSTEM FAN Fail Warning | [Disabled] |
|
| ||
| CPU Smart FAN Control | [Enabled] |
|
| ||
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: | F7: Optimized Defaults | |||
|
|
|
|
|
|
|
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR18V/+3.3V/+12V
Displays the current system voltages.
Current CPU Temperature
Displays current CPU temperature.
Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/ 176oF, 90oC/194oF.
CPU/SYSTEM FAN Fail Warning
Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled)
CPU Smart FAN Control
Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system requirements. If disabled, CPU fan runs at full speed. (Default: Enabled)
- 43 - | BIOS Setup |
