Intel GA-G31M-S2C, GA-G31M-S2L Init Display First, Onboard VGA, On-ChipFrame Buffer Size

Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card or the onboard VGA.

PCI	Sets the PCI graphics card as the first display. (Default)
Onboard	Sets the onboard VGA as the first display.
PEG	Sets PCI Express graphics card as the first display.

Onboard VGA

Enables or disables the onboard VGA function.

Enable If No Ext PEG

Activates the onboard VGA only if no PCI Express VGA card is installed. (Default)

Always Enable

Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable.

On-Chip Frame Buffer Size

Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: 8MB+1~2MB for GTT (default), 1MB+1~2MB for GTT.

- 41 - BIOS Setup