MB Intelligent Tweaker(M.I.T.) |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| MB Intelligent Tweaker(M.I.T.) |
|
| |
| Robust Graphics Booster | [Auto] |
|
| Item Help | |
| CPU Clock Ratio (Note) | [25X] |
| Menu Level` | ||
| CPU Host Clock Control | [Disabled] |
|
|
| |
x CPU Host Frequency (Mhz) | 133 |
|
|
| ||
| PCI Express Frequency (Mhz) | [Auto] |
|
|
| |
| Performance Enhance | [Standard] |
|
|
| |
| System Memory Multiplier (SPD) | [Auto] |
|
|
| |
| Memory Frequency (Mhz) 533 | 533 |
|
|
| |
| High Speed DRAM DLL Settings | [Option 1] |
|
|
| |
******** System Voltage Optimized | ******** |
|
|
| ||
| System Voltage Control | [Manual] |
|
|
| |
| DDR2 OverVoltage Control | [Normal] |
|
|
| |
| FSB OverVoltage Control | [Normal] |
|
|
| |
| CPU Voltage Control | [Normal] |
|
|
| |
| Normal CPU Vcore | 1.38750V |
|
|
| |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
•Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
•When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings.
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo.
CPU Clock Ratio (Note)
Allows you to alter the clock ratio for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
CPU Host Clock Control
Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. (Default: Disabled)
(Note) This item appears only if you install a CPU that supports this feature.
- 49 - | BIOS Setup |