Intel GA-GC230D user manual 2-3Standard CMOS Features, Date, Time, IDE Channel 0 Master/Slave

2-3 Standard CMOS Features

`

`

`

`

KLJI

`

Date

Sets the system date. The date format is week (read-only), month, date and year . Select the desired field and use the up arrow or down arrow key to set the date.

Time

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.

IDE Channel 0 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

IDE Channel 0 Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:

•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
•	Manual	Allows you to manually enter the specifications of the hard drive when the
		hard drive access mode is set to CHS.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.

IDE Channel 2, 3 Master

IDE Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

Extended IDE Drive		Configure your IDE/SATA devices using one of the two methods below:
•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), Large.

- 27 - BIOS Setup