Intel GA-GC230D user manual 2-5Integrated Peripherals, On-ChipPrimary PCI IDE, On-ChipSATA Mode

2-5 Integrated Peripherals

`

KLJI

On-Chip Primary PCI IDE

Enables or disables the first integrated IDE controller. (Default: Enabled)

On-Chip SATA Mode

Configures the integrated SATA controller.

Disabled	Disables the integrated SATA controller.
Auto	Lets BIOS set SATA devices to Combined or Enhanced mode.
	If your onboard SATA controller is automatically configured to Combined
	mode, you can manually re-configure it to Enhanced mode as needed.
	(Default)
Combined	Sets all SATA devices to operate in PATA mode. Combined allows a
	maximum of 4 ATA devices to be used simultaneously: two PATA devices
	plus two SATA devices.
Enhanced	Sets all SATA devices to operate in SATA mode.
Non-Combined	Sets all SATA devices to operate in PATA mode and disables the integrated
	IDE controller.

PATA IDE Set to

This value is dependent on the On-Chip SATA Mode setting.

SATA Port0 Set to

This value is dependent on the On-Chip SATA Mode setting.

SATA Port1 Set to

This value is dependent on the On-Chip SATA Mode setting.

- 31 - BIOS Setup