Intel Internet Station manual Connect the network cable, Connect your modem or Isdn adapter

Power port

PC Card Slots 1 and 2 Reset button Serial port 10Base-T port

Connect the network cable

Attach a network cable to the RJ-45 connector of the Internet Station and your 10Mbps Ethernet hub. Use a Category 5 10Base-T cable for your connection.

Connect your modem or ISDN adapter

ØCaution: Make sure your Internet Station power is off before you connect or disconnect modems.

Connect up to three modems to the Internet Station. The Internet Station only supports the use of one ISDN adapter at a time.

Connect an external modem or ISDN adapter to the serial connector on the back of the Internet Station and to a telephone line. If you use a PC card modem, slide the card into a slot and seat it firmly. Make sure that the PC Card eject button is fully extended. Use the connector supplied with the modem to connect the card to a telephone line.

Connect the power cord

Connect the power supply to the Internet Station. Connect a power cord to the power supply and to the power source. Press the Power button on the front panel of the Internet Station. The Power button LED lights.

Organize your cables

Install the CableKeeper ring to keep your cables organized. Insert and rotate the CableKeeper on the back panel of the Internet Station.

14 Intel® InBusiness™ Internet Station